ZAB-50TG Typ AZAB-50TShch
USSR – BOMBS AND FUZES
BOMBS
INCENDIARY
ZAB-50TG TYPE B
TYPE

Combination incendiary bomb

NOSE FUZE

AM-B, AGM-3

TAIL FUZE

None

TOTAL LENGTH (in.)

39.1

BODY LENGTH (in.)

31.6

MAXIMUM DIAMETER (in.)

8.1

WALL THICKNESS (in.)

––

TOTAL WEIGHT

105.5 lbs.

CHARGE/WEIGHT RATIO

57%

MAIN CHARGE (TYPE & WEIGHT)

Thermite 41.8 lbs.
Thickened naphtha petroleum 18.7 lbs.

SUSPENSION

Probably single supension

COLOR MARKINGS

Nose band – Red
Body band – Blue

BODY CONSTRUCTION

The bomb body consists of a cylindrical body, ogival nose, and conical after body. This bomb has no filling plug in the base section. The forward part of the bomb is filled with loose thermite, held in place by four metal partitions. The after section is filled with the tickened fuel. A flat diaphragm of corrugated aluminum separates the two fillings. A powder channel extends from the fuze pocket, through the diaphragm, to the after body. It provides for simultaneous ignition of both fillings, and also allows enough delay so that the bomb penetrates the target before igniting. This bomb has paraffin filled gas ports in the middle of the body near the diaphragm.

TAIL CONSTRUCTION

The tail consists of four sheet metal fins welded to the tail cone and suported by a single struts.

REMARKSBurns to 6 minutes. Simultaneous ignition of the fuels gives an intense heat.

Figure 40 – ZAB-50TG TYPE B INCENDIARY BOMB

ZAB-50TG Typ AZAB-50TShch