U.S.N.B.D. - UNITED STATES - BOMBS AND FUZES; PYROTECHNICS |
SECTION II - INCENDIARY & CHEMICAL BOMBS |
DATA: |
AN-M76 (Service) |
U.S. ARMY - NAVY BOMB |
|
|
500 LB. INCEND. |
||
OVERALL LENGTH |
59.2 in. |
||
BODY LENGTH |
45.3 in. | ||
BODY DIAMETER |
14.0 in. | ||
WALL THICKNESS |
0.3 in. |
AN-M76 |
|
TAIL LENGTH |
13.9 in. |
(Service) |
|
TAIL WIDTH |
14.8 in. | ||
TAIL WEIGHT |
12.3 lbs. | ||
|
|||
|
|||
|
WEIGHTS: |
|
|||
Type of Filling |
Oil gel PT 1 | ||
Weight of Filling |
180 lbs. | ||
Total Weight |
475 lbs. | ||
Chg/Wt. Ratio |
38% |
|
|
FUZING: |
Nose: |
AN-M103A1, AN-M103, M103, M135A1, M136, M136A1, M139, M139A1, AN-M139A1, M140, M140A1, AN-M140A1, M163, M164, M165, M166, T82 |
Tail: |
AN-M101A2, AN-M101A1, M161 |
BOMB CONSTRUCTION: |
The body is of one piece cast steel construction with a base plate welded to body, and a burster tube 3.5 inches in diameter, 35.75 inches long running through the center of bomb welded to the nose and to the base plate. The M115 adapter booster screws into the base plate. The bomb tail is a cast steel sleeve with four sheet steel fins and internal box type struts. Suspension is accomplished by two suspension lugs welded on body seven inches on each side of cen-ter of gravity and by a single lug, 180° removed at the center of gravity. |
OPERATION: |
On impact, the fuzes function and detonate the 1.23 lb. tetryltol burster in the burster tube and initiate the 9 lb. white phosphorous igniter which, in turn, ignites the main filling. The bomb has a dispersal area of about 500 x 600 feet. |
REMARKS: |
Attention is drawn to the fact that white phosphorous is present in the igniter and proper precautions should be taken in disposiong of these bombs. The incen-diary mixture, PT 1, consisting essentially of paste of magnesium, gasoline, and a thickener, liberates heat at about 4 time that given off by the usual incendiary mix-ture IM. |
For COLOR AND MARKINGS, see |
INTRODUCTION, Page 100. |
|