U.S.N.B.D. - UNITED STATES - BOMBS AND FUZES; PYROTECHNICS |
SECTION I - HIGH EXPLOSIVE BOMBS |
PART IV - U.S. ARMY-NAVY "AN" SERIES BOMBS |
DATA: |
ARMY - NAVY BOMB |
|
|
250 LB. G.P. |
|
OVERALL LENGTH |
45.4 in. | |
BODY LENGTH |
36.0 in. | |
BODY DIAMETER |
10.9 in. | |
WALL THICKNESS |
0.27 in. |
AN-M57 |
TAIL LENGTH |
12.1 in. |
AN-M57A1 |
TAIL WIDTH |
14.9 in. | |
TAIL WEIGHT |
6.0 lb. |
(Service) |
WEIGHTS: |
Type of Filling |
50/50 Amatol | T.N.T. | |
Weight of Filling |
123.7 lbs. | 129.0 lbs. | |
Total Weight |
255.9 lbs. | 260.0 lb. | |
Chg/Wt. Ratio |
48.0% |
50.0% |
|
FUZING: |
Regular Missions |
Nose: |
AN-M103, AN-M103A1, M103, M135, M135A1, M136, M136A1, |
Tail: |
AN-M100A2, AN-M100A1, M100, M160 |
Special Missions |
Tail: |
M112, M112A1, (Masthead bombing from land base only) |
Nose: |
Shipping plug when above fuzes used in the tail. |
VT Missions |
Nose: |
T50E1, T89, T91, M166 (T51E1), T82 |
Tail: |
AN-M102A2 (to insure detonation in event of VT fuze failure). |
REMARKS: |
The AN-M57A1 differs from the AN-M57 in these respects: |
(a) The AN-M57A1 incorporates two pins fitted into the base plate which extend into the main filling and prevent removal of the base plate. |
(b) The AN-M57A1 used the M102A1 adapter booster, which has a 3/8" hole, mating with a groove in the internal threads of the base plate. A locking pin, shiped with anti-withdrawal fuzes only, fits through the hole and into the groove and pre-vents extraction of the adapter booster. The pin is held in place by the fuze body. |
When anti-ricochet action is desired, the M16 anti-ricochet device is installed, consisting of the M7 parachute, M202 fuze adapter, and M151 tail fuze. |
For construction of Body, Suspension, Color & Markings, Type of Filling, and Tail construction, see Instruction, page 37. |
|