VT FUZES FOR PROJECTILES AND SPIN-STABILIZED ROCKETS |
Chapter 4 - VT FUZES FOR PROJECTILES |
Mk 53 Mods 3-6 (Mods 3 and 4 Obsolete) |
General Data |
Projectiles Used In 5"/25, 5"/38, 5"/51 A.A. Commmon. Mk 53 all Mods except Mod 0 are recommended for use in 5"/51 guns at full charge. |
Markings |
Mk 53 Mod _____ |
Model _____ Lot _____ |
Over-All Dimensions and Weight |
Length | 9.0 in. (approx.) |
Diameter at base of ogive | 3.3 in. (approx.) |
Threaded length | 0.5 in. (approx.) |
Threads | 2.65 in. 10 R.H. |
Weight |
4.91 lb. |
Material. Green ethyl cellulose plastic nose ogive molded integral to steel base ring; steel body cylinder. |
Arming Range | 500 yd. |
Type of Energizer | Reserve |
Wave-Suppression-Feature | None |
Self-Destructive Feature | None |
Auxiliary Detonating Fuze | Mk 44 |
Compression-Type Waterproofing |
only |
Description |
Description and employment of this fuze is the same as for Mk 53 Mods 0-2 except that the minimum range is 400 yards instead of 700 yards. |
Remarks |
This fuze replaced the VT Fuzes Mk 32 and Mk 40. |
Mk 53 Mod 4 is identical in all operational and physical characteristics to the Mk 53 Mod 3, except that it operates at a different frequency than the Mod 3. This change in fre-quency was made as a countermeasure protection. |
Mk 53 Mod 5 is identical to Mod 4 except that the body cylinder of the fuze is 0.316 inch longer in order to accommodate the compression type of waterproofing between the body of the VT fuze and the auxiliary detonating fuze. The length of the projectile cavity to the lower face of the auxiliary detonating fuze remains the same as previous mods; but because of the long body cylinder the distance to the shoulder of the cavity is in-creased; hence, Mod 5 will not fir any previous projectile cavity. |
Mk 53 Mod 6 is identical to Mod 5 in operational and pfysical characteristics, except that it operates at a different frequency (same as Mod 3). Mod 6 is physically interchangeable with Mod 5, but not with any previous mod. |
|