ALLIED BOMBS AND FUZES |
BRITISH BOMBS - SECTION 2 |
Bomb Data |
File No.: 1256.1 |
Nationality: British |
Information Data: October 1942 |
SIZE: |
S.N. 1400 lb. Mark II |
TYPE: |
G.P.-H.E. (Light Case) |
TARGET:
|
General bombardement on targets where large blast damage is desirable. |
FUZES: |
NOSE: |
|
TAIL: |
|
DATA |
S.N. 1400 lb. Mark II |
||
1 |
OVERALL LENGTH |
133.1 inches |
|
2 |
LENGTH OF BODY |
93.0 inches |
|
3 |
DIAMETER OF BODY |
18.5 inches |
|
4 |
THICKNESS OF WALL |
0.51 inches |
|
5 |
MATERIAL OF WALL |
Mild steel. |
6 |
CONSTRUCTION OF BODY |
The body of this bomb is constructed of steel plate, the cylindrical body being rivetted longitudinally with four rows of large rivets (two rows on each side). The conical nose section of pressed steel is rivetted to the body and a coni-cal nose adapter is rivetted to the nose section. A flat, male base plate is rivetted to the rear of the body. This bomb is of distinctive construction and is easily recognized. |
7 |
TYPE OF SUSPENSION |
The bomb is suspended horizontally. |
8 |
CONSTRUCTION OF SUSPENSION LUG |
|
9 |
COLOR & MARKINGS ON BOMB AND TAIL |
The body and tail assembly are painted yellow with a green band just forward of the suspension lug and a red band around the nose. The markings "Amatol 70/30" or "Amatol 80/20" may be found stencilled in three places just below the green band. |
10 |
LEMGTH OF TAIL |
49.0 inches |
11 |
WIDTH OF TAIL |
20.0 inches |
12 |
MATERIAL OF TAIL |
Mild steel. |
13 |
CONSTRUCTION OF TAIL |
The tail assembly consists of: A cone with a rounded apex held to the base plate by four bolts; four vanes are rivetted to the cone and a reinforced cylinder is rivetted to the cone. |
14 |
WEIGHT OF TAIL |
|
15 |
TYPE OF FILLING |
Two fillings may be used in this bomb: 1) Amatol 70/30 or 2) Amatol 80/20. |
16 |
WEIGHT OF FILLING |
1) 750.0 lbs. |
17 |
TOTAL WEIGHT OF BOMB |
1) 1474.0 lbs. |
18 |
CHARGE/WEIGHT RATIO |
1) 51.0% |