ALLIED BOMBS AND FUZES |
BRITISH BOMBS - SECTION 2 |
Bomb Data |
File No.: 1254.4 |
Nationality: British |
Information Data: October 1942 |
SIZE: |
250 lb. Mark IV |
TYPE: |
G.P.-H.E. |
|
500 lb. Mark IV |
|
|
TARGET: |
General Bombardement |
FUZES: |
NOSE: |
|
|
|
TAIL: |
|
DATA |
250 lb. Mark IV |
500 lb. Mark IV |
|
1 |
OVERALL LENGTH |
56.0 inches |
70.6 inches |
2 |
LENGTH OF BODY |
28.3 inches |
37.2 inches |
3 |
DIAMETER OF BODY |
10.2 inches |
12.9 inches |
4 |
THICKNESS OF WALL |
||
5 |
MATERIAL OF WALL |
Steel |
Steel |
6 |
CONSTRUCTION OF BODY |
The body of these bombs is a streamlined steel casting or forging with threaded nose and tail adapters which hold the exploder tubes (not a compete tube as in other G.P. Mk. Series bombs). |
7 |
TYPE OF SUSPENSION |
These bombs are suspended horizontally. |
8 |
CONSTRUCTION OF SUSPENSION LUG |
Eyebolt at center of gravity of bomb, attached with cap screws. |
9 |
COLOR & MARKINGS ON BOMB AND TAIL |
The body and tail assembly is painted yellow with a green band at the largest diameter, and a red band around the nose. The symbols "Amatol 60/40" my be stencilled in three places below the green band. |
10 |
LENGTH OF TAIL |
27.7 inches |
33.4 inches |
11 |
WIDTH OF TAIL |
10.2 inches |
12.9 inches |
12 |
MATERIAL OF TAIL |
Mild steel |
Mild steel |
13 |
CONSTRUCTION OF TAIL |
The tail assembly consists of: a cone which fits over the base plate and is secured to it by four spring clips; four vanes rivetted to the cone; and a cylinder rivetted to the vanes. |
14 |
WEIGHT OF TAIL |
9.0 lbs. |
16.0 lbs. |
15 |
TYPE OF FILLING |
The filling of these bombs is Amatol 60/40. |
16 |
WEIGHT OF FILLING |
67.0 lbs. |
143.0 lbs. |
17 |
TOTAL WEIGHT OF BOMB |
217.0 lbs. |
439.0 lbs. |
18 |
CHARGE/WEIGHT RATIO |
30% |
34% |