ALLIED BOMBS AND FUZES |
BRITISH BOMBS - SECTION 2 |
Bomb Data |
File No.: 1222.1 |
Nationality: British |
Information Data: October 1942 |
SIZE: |
25 lb. Mark I and II |
TYPE: |
Incendiary |
TARGET: |
Use against frame or non-fireproof construction |
FUZES (Nose): |
The fuze is a simple striker pellet type with a shear wire and creep spring. The striker is contained in a central brass tube. |
|
DATA |
|||
1 |
OVERALL LENGHT |
32.6 inches |
|
2 |
LENGTH OF BODY |
||
3 |
DIAMETER OF BODY |
5.03 inches |
|
4 |
THICKNESS OF WALL |
5 |
MATERIAL OF WALL |
Steel |
6 |
CONSTRUCTION OF BODY |
The body consists of a sharp, cast steel nose joined to a cylindrical steel case and a flat steel base plate in which is screwed a tail adapter hol- ding the tail-blowing charge. A central brass tube containing the fuze assembly is threaded into the adapter. The cylindrical section of the bomb body is streamlined externally with cardboard. |
7 |
TYPE OF SUSPENSION |
This bomb is suspended horizontally or in small bomb con-tainer. |
8 |
CONSTRUCTION OF SUSPENSION LUG |
For individual suspension there is an eyebolt secured to a band around the body near the center of gravity. |
9 |
COLOR & MARKINGS ON BOMB AND TAIL |
The bomb body is painted a dull red with a ½ inch bright red band around the nose and two (2) ½ inch bands of black on each side of the red band. Manufacutre's and filling agency's markings may be found stencilled on bombs. |
10 |
LENGHT OF TAIL |
approx. 14.0 inches |
11 |
WIDTH OF TAIL |
5.0 inches |
12 |
MATERIAL OF TAIL |
Aluminum |
13 |
CONSTRUCTION OF TAIL |
The tail assembly consists of: a cone which is secured to the base plate by four screws; four vanes are rivetted to the cone; and a cylinder is rivetted to the vanes for rein-forcing. |
14 |
WEIGHT OF TAIL |
|
15 |
TYPE OF FILLING |
The filling consists of a mixture of magnesium and thermite. |
16 |
WEIGHT OF FILLING |
Magnesium 5 lbs. 0 ozs. |
17 |
TOTAL WEIGHT OF BOMB |
Approx. 25 lbs. |
18 |
CHARGE/WEIGHT RATIO |
Approx. 45% |